Parameter Introduction:
Extra-high pressure generators of HY380 series adopt oil boosting.They adopt most up-to-date technology and have many optimized functions,which are not possessed by other China-made oil boosting generators,and also they have higher cutting pressure..
| No | Name |
|
Unit | ||||||||||||||
| 1 | Adjusting Range of Cutting Edge |
|
Mpa | ||||||||||||||
| 2 | Working Pressure |
|
Mpa | ||||||||||||||
| 3 | Maximum Water Flux |
|
L/min | ||||||||||||||
| 4 | Water Nozzle (Stone) Diameter | Ø0.25-Ø0.3 | mm | ||||||||||||||
| 5 | Inner Hole Size Of Sand-Mixed Pipe | Ø0.8 or Ø1.0 | mm | ||||||||||||||
| 6 |
|
|
|
| No | Name | Parameter | Unit | ||||||||
| 1 | Type |
|
|||||||||
| 2 | Maximum Cutting Range |
|
mm | ||||||||
| 3 | Travel of Knife | 0-200 | mm | ||||||||
| 4 |
|
0-12000 | mm/min | ||||||||
| 5 | Cutting Accuracy | ìÀ0.20 | mm | ||||||||
| 6 | Controlling accuracy | ìÀ0.01 | mm | ||||||||
| 7 | Working motor | Servo Motor | |||||||||
| 8 | Air Compressor Pressure | 0.6-0.8 | MPa | ||||||||
| 9 | Abrasive | Garnet | |||||||||
| 10 | abrasive granularity | 60-100 | Item | ||||||||
| 11 | Microcomputer | 686 | |||||||||
| 12 | Program Software | SAMEi¯s Waterjet Scanning Program System |
